LT1130A Advanced Low Power 5V RS232 Drivers/Receivers with Small Capacitors (Includes LT1130 thru LT1141)

Product DetailsThe LT1130A/LT1140A series of RS232 drivers/receivers features special bipolar construction techniques which protect the drivers and receivers beyond the fault conditions stipulated for RS232. Driver outputs and receiver inputs can be short

ADM485 5 V, Low Power, 5 Mbps, Half Duplex EIA RS-485 Transceiver

Product DetailsThe ADM485 is a differential line transceiver suitable for high speed bidirectional data communication on multipoint bus transmission lines. It is designed for balanced data transmission and complies with both EIA Standards RS-485 and RS-42

ADM207E EMI/EMC Compliant, ±15kV Protected, 230kBPS, RS-232 Transceiver with 5 Drivers & 3 Receivers

Product DetailsThe ADM2xxE is a family of robust RS-232 and V.28 interface devices which operates from a single +5 V power supply. These products are suitable for operation in harsh electrical environments and are compliant with the EU directive on EMC (8

ADM202E EMI/EMC Compliant, ±15 kV ESD Protected, RS-232 Line Drivers/Receivers

Product DetailsThe ADM202E andADM1181Aare robust, high speed, 2- channel RS232/V.28 interface devices that operate from a single +5 V power supply. Both products are suitable for operation in harsh electrical environments and are compliant with the EU dir

LTC1482 Low Power RS485 Transceiver with Carrier Detect and Receiver Fail-Safe

Product DetailsThe LTC1482 is a low power RS485 compatible transceiver that offers an active low carrier detect output. The open-drain carrier detect pin allows several transceivers to share the same carrier detect line and can be used to detect the inser

ADM3311E 3-V, RS-232 Serial Port Driver-Receiver

Product DetailsThe ADM3311E is a three driver/five receiver product designed to fully meet the EIA-232 standard while operating with a single +2.7 to 3.6V power supply. The devices feature an on-chip DC to DC converter, eliminating the need for dual power

ADM2482E 2.5 kV Signal Isolated, ESD Protected, Full/Half Duplex RS-485 Transceiver w/ Transformer Driver (16 Mbps)

Product DetailsThe ADM2482E/ADM2487E are isolated data transceivers with ±15 kV ESD protection and are suitable for high speed, half-duplex or full-duplex communication on multipoint transmission lines. For half-duplex operation, the transmitter ou

ADM3251E Isolated Single Channel RS-232 Line Driver/Receiver

Product DetailsThe ADM3251E is a high speed, 2.5 kV fully isolated, single- channel RS-232/V.28 transceiver device that operates from a single 5 V power supply. Due to the high ESD protection on the RINand TOUTpins, the device is ideally suited for operat

ADM2461E 500 kbps, 5.7 kV RMS, Signal Isolated Half Duplex RS-485 Transceiver with ±15 kV IEC ESD

Product DetailsThe ADM2461E/ADM2463E are 500 kbps, 5.7 kV rms, signal isolated RS-485 transceivers that pass radiated emissions testing to the EN55032 Class B standard with margin on a 2-layer printed circuit board (PCB). The ADM2461E/ADM2463E isolation b

ADM2865E 5.7 kV RMS Signal and Power Isolated RS-485 Transceiver with ±15 kV IEC ESD

Product DetailsTheADM2861E,ADM2863E, ADM2865E, andADM2867Eare 5.7 kV rms signal and power isolated RS-485 transceivers. These devices are designed for balanced transmission lines and comply with ANSI/TIA/EIA-485-A-98 and ISO 8482:1987(E). The devices pass

ADN4668 3 V LVDS Quad CMOS Differential Line Receiver

Product DetailsThe ADN4668 is a quad-channel CMOS, low voltage differential signaling (LVDS) line receiver offering data rates of over 400 Mbps (200 MHz) and ultralow power consumption. It features a flow-through pin configuration for easy PCB layout and

ADN4664 Dual, 3 V, CMOS, LVDS Differential Line Receiver

Product DetailsThe ADN4664 is a dual, CMOS, low voltage differential signaling (LVDS) line receiver offering data rates of over 400 Mbps (200 MHz) and ultralow power consumption. It features a flow-through pinout for easy PCB layout and separation of inpu

ADG3243 2.5 V/3.3 V, 2-Bit, Individual Control Level Translator Bus Switch

Product DetailsThe ADG3243 is a 2.5 V or 3.3 V, 2-bit, 2-port digital switch with individual channel control. It is designed on a low voltage CMOS process, which provides low power dissipation yet gives high switching speed and very low on resistance. Thi

ADG3242 2.5 V/3.3 V, 2-Bit, Common Control Level Translator Bus Switch

Product DetailsThe ADG3242 is a 2.5 V or 3.3 V, 2-bit, 2-port common-control digital switch. It is designed on a low voltage CMOS process, which provides low power dissipation yet gives high switching speed and very low on resistance. This allows the inpu

ADUM4470 Isolated Switch Regulator with Quad-Channel Isolators (4/0 Channel Directionality)

Product DetailsThe ADuM4470 /ADuM4471/ADuM4472/ADuM4473/ADuM4474are quad-channel, digital isolations with a regulated DC/DC isolated power supply controller with an internal MOSFET driver. The DC/DC controller has an internal isolated PWM feedback from th

ADUM2280 5 kV RMS Dual Channel Digital Isolators (Default High, 2/0 Channel Directionality)

Product DetailsThe ADuM2280 /ADuM2281/ADuM2285/ADuM2286(also referred to as ADuM228x in this data sheet) are 5 kV rms dual-channel digital isolators based on Analog Devices, Inc.,iCoupler®technology. Combining high speed CMOS and monolithic air core t

ADUM3123 Isolated Precision Gate Driver, 4 A Output

Product DetailsThe ADuM3123 is a 4.0 A isolated, single channel driver that employs Analog Devices, Inc.’siCoupler®technology to provide precision isolation. The ADuM3123 provides 3000 VRMSisolation in the narrow body 8-lead SOIC package. Combin

ADuM131D Robust, Triple Ch. isolator W/ Input Disable & 1 Reverse Channel

Product DetailsTheADuM130D/ADuM130E/ADuM131D/ADuM131Eare triple-channel digital isolators based on Analog Devices, Inc.,iCoupler®technology. Combining high speed, complementary metal-oxide semiconductor (CMOS) and monolithic air core transformer techn

LTM2893 100MHz Isolated ADC Serial Interface

Product DetailsThe LTM2893 is a high speed isolated μModule (micromodule) SPI interface with ADC control signals. The LTM2893 is optimized for isolating 1Msps high resolution 18-bit SAR ADCs, such as the LTC2338 and similar families, and can interface

LTM2886 SPI/Digital or I2C μModule Isolator with Fixed ±5V and Adjustable 5V Regulated Power

Product DetailsThe LTM2886 is a complete galvanic digital μModule®(micromodule) isolator. No external components are required. A single 3.3V or 5V supply powers both sides of the interface through an integrated, isolated DC/DC converter. A logic su

Sayfa 1 / 26