ADM232L Low Power, +5V CMOS RS-232 100kBPS Transceiver with 2 Drivers/Receivers

Product DetailsThe ADM2xx family of line drivers/receivers is intended for all EIA-232-E and V.28 communications interfaces, especially in applications where ±12 V is not available. The ADM223, ADM230L, ADM235L, ADM236L andADM241Lfeature a low powe

ADM1485 5 V, High Speed (30 Mbps), Low Power, Half Duplex EIA RS-485 Transceiver

Product DetailsThe ADM1485 is a differential line transceiver suitable for high speed bidirectional data communication on multipoint bus transmission lines. It is designed for balanced data transmission and complies with both EIA Standards RS-485 and RS-4

ADM1181A EMI/EMC Compliant, ±15 kV ESD Protected, RS-232 Line Drivers/Receivers

Product DetailsTheADM202Eand ADM1181A are robust, high speed, 2- channel RS232/V.28 interface devices that operate from a single +5 V power supply. Both products are suitable for operation in harsh electrical environments and are compliant with the EU dir

ADM483E 5 V, ±15 kV ESD Protected, Slew Rate Limited, Low Power, Half Duplex RS-485/RS-422 Transceiver

Product DetailsThe ADM483E is a 5 V, low power data transceiver with ±15 kV ESD protection suitable for half-duplex communication on multipoint bus transmission lines. The ADM483E is designed for balanced data transmission and complies with TIA/EIA

LT1785 60V Fault Protected RS485/RS422 Transceivers

Product DetailsThe LT1785/LT1791are half-duplex and full-duplex differential bus transceivers for RS485 and RS422 applications which feature on-chip protection from overvoltage faults on the data transmission lines. Receiver input and driver output pins c

LTC1688 100Mbps RS485 Hot Swapable Quad Drivers

Product DetailsThe LTC1688/LTC1689 are ultrahigh speed, differential bus/line drivers that can operate at data rates up to 100Mbps. Propagation delay is guaranteed at 8ns ±4ns over the full operating temperature range. These devices operate over th

LTM2882 Dual Isolated RS232 μModule Transceiver + Power

Product DetailsThe LTM2882 is a complete galvanically isolated dual RS232 μModule®(micromodule) transceiver. No external components are required. A single 3.3V or 5V supply powers both sides of the interface through an integrated, isolated DC/DC co

ADM1490E 5 V, 16 Mbps, ESD Protected, Full-Duplex RS-485 Transceiver

Product DetailsThe ADM1490E /ADM1491Eare RS-485/RS-422 transceivers with ±8 kV ESD protection and are suitable for high speed, full-duplex communication on multipoint transmission lines. In particular, the ADM1490E/ADM1491E are designed for use in

ADM2565E 3 kV RMS Signal and Power Isolated RS-485 Transceiver with ±15 kV IEC ESD

Product DetailsTheADM2561E,ADM2563E, ADM2565E, andADM2567Eare 3 kV rms signal and power isolated RS-485 transceivers. These devices are designed for balanced transmission lines and comply with ANSI/TIA/EIA-485-A-98 and ISO 8482:1987(E). The devices pass r

ADLT2852S 3.3 V, 20 Mbps RS485/RS422 Transceiver

Product DetailsThe ADLT2852S-CSL is a low power, 20 Mbps RS485/RS422 transceiver operating on a 3.3 V supply. The receiver has a fail-safe feature that guarantees a high output state under conditions of floating or shorted inputs.The driver maintains a hi

ADN4663 Dual, 3 V, CMOS, LVDS High Speed Differential Driver

Product DetailsThe ADN4663 is a dual, CMOS, low voltage differential signaling (LVDS) line driver offering data rates of over 600 Mbps (300 MHz), and ultralow power consumption. It features a flow-through pinout for easy PCB layout and separation of input

ADN4662 Single, 3 V, CMOS, LVDS Differential Line Receiver

Product DetailsThe ADN4662 is a single, CMOS, low voltage differential signaling (LVDS) line receiver offering data rates of over 400 Mbps (200 MHz), and ultralow power consumption. It features a flow-through pinout for easy PCB layout and separation of i

ADG3308 Low Voltage, 1.15 V to 5.5 V, 8-Channel Bidirectional Logic Level Translator

Product DetailsThe ADG3308 is a bidirectional level translator containing eight bidirectional channels. The ADG3308 can be used in multivoltage digital system applications, such as a data transfer between a low voltage DSP controller and a higher voltage

ADG3304 Low Voltage 1.15 V to 5.5 V, 4 Channel, Bidirectional, Logic Level Translator

Product DetailsThe ADG3304 is a bidirectional logic level translator that contains four bidirectional channels. It can be used in multivoltage digital system applications such as data transfer between a low voltage DSP/controller and a higher voltage devi

LTC6820 isoSPI Isolated Communications Interface

Product DetailsThe LTC6820 provides bidirectional SPI communications between two isolated devices through a single twisted-pair connection. Each LTC6820 encodes logic states into signals that are transmitted across an isolation barrier to another LTC6820.

ADUM4190 High Stability Isolated Error Amplifier

Product DetailsThe ADuM4190 is an isolated error amplifier based on ADI,iCoupler®technology. The ADuM4190 is ideal for linear feedback power supplies. The primary side controllers of the ADuM4190 enable improvements in transient response, power densit

ADuM130D Robust, Triple Ch. Isolator W/ Input Disable & 0 Reverse Channels

Product DetailsThe ADuM130D/ADuM130E/ADuM131D/ADuM131Eare triple-channel digital isolators based on Analog Devices, Inc.,iCoupler®technology. Combining high speed, complementary metal-oxide semiconductor (CMOS) and monolithic air core transformer tech

ADuM242D Robust 5kV RMS Quad Channel Digital Isolators, Input Disable (2/2 Channel Directionality)

Product DetailsTheADuM240D/ADuM240E/ADuM241D/ADuM241E/ADuM242D/ADuM242Eare quad-channel digital isolators based on Analog Devices, Inc.,iCoupler®technology. Combining high speed, complementary metal-oxide semiconductor (CMOS) and monolithic air core t

ADuM4121 High Voltage, Isolated Gate Driver with Internal Miller Clamp, 2 A Output with Thermal Shutdown

Product DetailsThe ADuM4121/ADuM4121-1 are 2 A isolated, single-channel drivers that employ Analog Devices, Inc.’siCoupler®technology to provide precision isolation. The ADuM4121/ADuM4121-1 provide 5 kV rms isolation in the wide-body, 8-lead SOI

ADuM150N Robust 3.0 kV rms Five Channel Digital Isolators w/ Fail-Safe & 0 Reverse Channels

Product DetailsThe ADuM150N/ADuM151N/ADuM152N1are 5-channel digital isolators based on Analog Devices, Inc.,iCoupler®technology. Combining high speed, complementary metal-oxide semiconductor (CMOS) and monolithic air core transformer technology, these

Sayfa 1 / 26